Tracking Device - Mobile Monitoring

Motion Activated (Fast/Sleep Mode)

This transmitter is operated by a micro controller that contains a Sleep Mode program that keeps the transmitter inactive until it is moved. Once moved, the transmitter activates and transmits until it is reset with a magnet or the battery runs out. When the magnet is removed, the transmitter will output an 11 second continuous RF pulse and then delay for one minute so that you can place the transmitter in the object. It will then pulse three times to indicate that is in standby mode. It's normally used as passive theft protection so that little battery consumption is needed and yet you can be aware when an object has been stolen.

Motion Activated (Fast/Slow Mode)

This transmitter is operated by a micro controller that contains a Motion program. It's turned on and off by using a magnet. When the magnet is removed, the transmitter turns on and outputs an 11 second continuos RF pulse and then begins normal transmission. It then beeps at a rate of 40 beats per minute. When it senses motion, the beep rate changes to a rate of 96 beats per minute. When the transmitter has been still for 15 seconds, the pulse rate drops back to 40 beats per minute. After a transmitter is installed in an object, a magnet is used to reset the micro controller. It's normally used to track objects when it's important to know where the object is at all times and when the object is being moved.

Light Activated

This transmitter is operated by a micro controller that contains a Light Activation program. After this transmitter is installed in an object, a magnet is used to reset the micro controller. When the magnet is removed, the transmitter outputs in a 10 second continuous RF pulse and then begins to transmit every 5 seconds. When exposed to a light level equivalent to a 15-watt bulb at 12 feet or greater for at least two seconds, the transmitter will change speed and beep once per second until either reset by the magnet or the battery runs out.
With the magnet attached, the power to the micro controller is disabled, and the transmitter consumes less than 5 micro-watts. This increases to 75 micro-watts when the transmitter is armed, waiting for the light to hit the Light Sensor. When the transmitter is transmitting, it consumes up to 500 micro-watts. The Light-Activated Transmitter is intended for concealment in a package so that you can be informed that the package has been opened. It has also been used very successfully to replace a breakwire.

Spy Devices

Spy Devices If your looking for discreet surveillance spy equipment for undercover spying operations then here at EuroEye we have a wide range of tools for combating industrial espionage and tackling internal theft from staff.
Millions of pounds annually are lost by business in the UK alone through stock theft from staff, customers, delivery personnel and opportunist crime. This applies to all businesses, be it retail newsagents, manufacturing concerns, restaurants, supermarkets, garages and showrooms. EuroEye is dedicated to making full use of the technology available today to nullify this threat and to restore peace of mind to the business owner. Equally there is a very real threat from industrial espionage within corporations competing for survival. Internal security, although normally efficient and well trained, can not be expected to be capable of dealing with the enormity and consequence of this danger. EuroEye can. That is our area of expertise. We use the very latest, specifically designed, electronic devices, which include miniature cameras, microwave equipment, listening devices, counter measures and multi-detection systems to ensure your security.

Collecting Intelligence - When collecting intelligence make sure you have the right tools for the job.

Please click here to take a look at our new Flash website, where you can find our full catalogue of products.